Ballpoint Pen With Stylus Jig (sized for F2 Ultra Workbed)

P2/P2S Usage:

Place the jig on the workbed and place pens in the slots. Once the pens are in place you can focus your machine. If you wish you can use the jig file to assist in lining up your images or text to be engraved or use the batch fill tool.

F2 Ultra Usage:

Once you've created the jig on the P2/P2S you can follow these instructions to use the jig in your F2 Ultra. 

Simply place pens on the jig and optionally align jig to laser bed with the 4 alignment holes. Longer screws will be required as the jig is 6mm thick.

If you wish to use the jig file to line up your pen engraving you will want to align the jig with the F2 Ultra's workbed. 4 holes are provided that match the outer corner holes of the workbed. NOTE: You'll need longer thumbscrews as the jig is 6mm thick.