Report

[Laser cut and engrave] Blank Square Wooden Plywood Sheet — Project made with xTool M1 Ultra machine for Laser cut and engrave.

Cutting template for other lasers with smaller work areas. Specifically for the F1/F2 Portables (100 x 100mm) and the F1/F2 Ultra Models (200 x 200mm)

Instruction

Cut 2 x 200 x 150mm with a 300 x 100remnant

.xs

Show 2 more

Application scenario

Laser processing

Machine & module

xTool M1 Ultra

20W

Compatible xTool Machine

10W, 20W

F2 Ultra UV

15W

80W

F2 Ultra

40W

F1 Ultra

20W

5W, 10W

5W, 10W, 20W

D1 Pro

5W, 10W, 20W, 40W

55W

10W

10W, 20W, 40W

M1 Ultra

10W

P2S

55W

Material used

1/8"(3mm) Basswood Plywood

135

Information

      I have the M1 Ultra (pictured) as well as the F2 and the F2 UItra UV.

Sheets from Xtool come in 300 x 300mm size which is perfect for the M1 Ultra but not the other two machines. The F2 is only 100 x 100mm work area and the F2 Ultra series is 200 x 200.

Thisa handy template is to cut the sheets down for use on the other two lasers. It's far more accurate to do so than hand saw as I have been doing.

Cut sizes for F2 & F2 Ultra

Instruction

Step1

Cutting template for other lasers with smaller work areas. Specifically for the F1/F2 Portables (100 x 100mm) and the F1/F2 Ultra Models (200 x 200mm) instruction: step 1 -

Preview

Often I have a project where I want to use my F2 or F2 Ultra UV, but the sheets come in 300 x 300mm sizes only.

These couple of files are to cut a full size sheet down to the correct sizes for the other machine. As many projects are rectangular I have the alternative 200 x 150mm size also.

Comments