Report

[Laser cut and engrave] Doberman Memorial Tile — Project made with xTool F1 machine for Laser cut and engrave.

[Laser cut and engrave] Doberman Memorial Tile — Project made with xTool F1 machine for Laser cut and engrave.

[Laser cut and engrave] Doberman Memorial Tile — Project made with xTool F1 machine for Laser cut and engrave.

[Laser cut and engrave] Doberman Memorial Tile — Project made with xTool F1 machine for Laser cut and engrave.

[Laser cut and engrave] Doberman Memorial Tile — Project made with xTool F1 machine for Laser cut and engrave.

[Laser cut and engrave] Doberman Memorial Tile — Project made with xTool F1 machine for Laser cut and engrave.

[Laser cut and engrave] Doberman Memorial Tile

[Laser cut and engrave] Doberman Memorial Tile

[Laser cut and engrave] Doberman Memorial Tile

[Laser cut and engrave] Doberman Memorial Tile

[Laser cut and engrave] Doberman Memorial Tile

[Laser cut and engrave] Doberman Memorial Tile

Doberman Memorial Tile

Paws & Portraits: Pet Gifts Contest

Instruction

Kaiser - Scratch Paper.xcs

Kaiser - Scratch Paper

.xcs

Application scenario

Laser processing (19min)

Machine & module

xTool F1

2W

Material used

Laser Engraving Photo Paper

White ceramic tile

Black colour it Spray paint

gift

287

Information

      For this project, I wanted to create a timeless pet memorial that celebrates the bond between families and their beloved companions. Starting with a plain white ceramic tile, I applied two coats of black spray paint before laser engraving a high-contrast portrait and personalised inscription, revealing the white ceramic beneath. After testing and refining the photo settings on black scratch paper, I achieved the level of detail I was aiming for. The finished tile was presented in a floating box frame with a matching sympathy card, creating a thoughtful keepsake that preserves precious memories for years to come.

Petgiftscontest

Instruction

1

Step1

Creative Process

Material Preparation

Prepare a white ceramic tile with 2 light coats of matt black spray paint, allowing each coat to dry thoroughly.

Image Preparation

Import the photograph into xTool Creative Space.
Adjust Grayscale to 15 / 250.
Apply Sharpen (approximately 20, depending on the photograph).

Laser Settings

Pass 1

Laser: IR DD
Speed: 450
Power: 100%
DPI: 400
Mode: Jarvis

Pass 2

Adjust the Grayscale slider to 220.
Laser: IR DD
Speed: 450
Power: 90%
DPI: 318

Finishing

Lightly dust the engraved surface with a soft brush to remove residue.
Apply a coat of clear matt lacquer to protect the finish.
Mount the completed tile into a shadow box frame for display.

Note: Sharpening values and grayscale settings may require adjustment depending on the quality, lighting and contrast of the original photograph.

https://www.facebook.com/share/p/19PHPGRoGU/?mibextid=wwXIfr

2

Step2

https://www.facebook.com/share/p/19PHPGRoGU/?mibextid=wwXIfr

Comments

Remixes

License

This work contains AI-generated content.

You may also like