gadgetsbeyondthisworld

Report

[Laser cut and engrave] New Home Snoopy Plywood Basswood House — Project made with F1 machine for Laser cut and engrave.

New Home Snoopy Plywood Basswood House

Instruction

newhomesnoopy.xcs

newhomesnoopy

.xcs

Application scenario

Laser processing (5min)

Machine & module

xTool F1

2W, 10W

Compatible xTool Machine

P3

F2

F2 Ultra UV

F2 Ultra（Single）

F2 Ultra

F1 Ultra

F1 Lite

S1

P2S

P2

M1 Ultra

M1

D1 Pro 2.0

D1 Pro

D1

Laserbox

M2

Material used

1/8"(3mm) Basswood Plywood

gift

65

2212

Information

      With this project you will learn the settings to engrave Plywood.

Instruction

1

Step1: What you will need

You will need some Plywood or Basswood to make this project.

2

Step2: Instructions

When working with wood I will always recommend using masking tape to avoid any burning marks on the wood. I used 100% Power and 300 Speed to get a good finish. If you would like your design to go darker just re-engrave.

Laser engraving or cutting wood is always very smoky so please make sure you work in a very well ventilated area.

3

Step3: Enjoy

If you get any burning marks you can get rid of them with some rubbing alcohol but the masking take is always a good trick.

Comments

Remixes

License

You may also like

new year bundle