Report
![[Laser cut and engrave] Initial Ornament/Keychain/Car Charm](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/dac7d039-5f4b-4442-9a6c-57fca1cd8af6?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Initial Ornament/Keychain/Car Charm
Instruction
Letters
.xcs
Application scenario
Laser processing (15min)
Machine & module
xTool M1 Ultra
20WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
44
404
Information
The possibilities are endless with this floral designed letter. You size it up or down to make it a keychain, ornament or car charm.
Instruction
1
Step1: Open in XCS and customize
Preview
Preview
- Open in XCS and customize if you like.
- You can engrave a name on the letter
2
Step2: Laser
Preview
- Select your material
- Auto measure
- and prepare for cutting
3
Step3: Finishing Touches
Preview
Preview
- Sand your letter if need be. I sanded mine with an 800 grit to make it really smooth
- you can stain this once your done sanding and have cleaned off the dust
- The photos attached are before and after sanding
Comments
