Report
![[Laser cut and engrave] Box organizer with dividers](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/5c47cc15-6d69-403e-8d5b-dd6044e9d122?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Box organizer with dividers](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Box organizer with dividers](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/5c47cc15-6d69-403e-8d5b-dd6044e9d122?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Box organizer with dividers](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/d7575c0c-43af-4ac0-bc28-516ffc10c75f/Untitled design (2).png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Box organizer with dividers](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/a151d39a-84c6-4bdc-bff4-8a50124a1782/IMG_9719 (1).jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Box organizer with dividers](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/c064cd58-4a5f-4666-a282-24f570a485f7/IMG_9718.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Box organizer with dividers](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/48316eab-2555-4ebe-a64f-c1f2e1f06aa4/Screenshot 2024-09-07 144717.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Box organizer with dividers
Remix
Instruction
Boxorganizer_diviers
.xcs
Show 1 more
Application scenario
Laser processing (21.37min)
Machine & module
xTool P2
55WCompatibles · 12
Accessories
xTool Smoke Purifier Pre filter(5PCS)
xTool P2 Honeycomb Panel
[US Only] xTool Fire Safety Set: Auto Fire Detection, Fire Extinguishing
Material used
1/8"(3mm) Basswood Plywood
128
1736
Information
I have loose papers everywhere with settings for my p2. When I start my laser I waste time because i can't find the paper for the settings. So, I had some scrap wood laying around and really liked this box i found on DesignFind - decided to give it a try. Loved the box and decided to add the dividers inside- it all fit great... the Box is about 5 inches big/wide and is a tight fit to put together - but if you take your time and shimmy it into place, it going to fit snug and won't need glue.
Credit goes to IronClad Laser Co
This remix is based on
How to Create a Small Live Hinge Jewelry Box
IronClad Laser CoInstruction
1
Step1: settings are in the descriptions
I did the box first. I did not weld or attach anything - When i welded my engraving together - it ended up making the time longer, so i detached everything.
- I made the settings for engraving 15 power, 250 speed 120 lpc and 1 pass.
- the cutting settings i used 90 power and 40 settings (this may need adjusting based on your wood)
- All pieces fit, however - it is a tight fit and may need to be **slowly** wiggled together.
Next I did the dividers.
- same settings as box - to change font of words/font/ and size ungroup the dividers . theses should fit loose enough to flip through - just add paper - I will be creating my own cardstock paper with setting template - let me know if interest.
Comments
![[US Only] xTool Fire Safety Set: Auto Fire Detection, Fire Extinguishing](https://image-res.xtool.com/resource/xtool/community/accessories/b92c6f38bd88fd3ef8264f34dfda14dc.webp)
