Coffee Bar – Edge-Lit LED Set: Moka, Espresso & Coffee Bean Clock | Turn Materials into Light

Information

       ☕ Coffee bar – a layered LED coffee set lit from below

A small, luminous coffee corner made of thin, stacked levels: a moka pot, an espresso cup with plate and an octagonal clock whose hour markers are coffee beans – all on a common base.

💡 The light is the star: wood and satin-finished acrylic alternate layer by layer, so that the pieces glow warm from the inside. Switched off a simple decorative object - switched on an inviting "Sit down, we'll have a drink together".

🔧 Material & Machine:
• 3 mm poplar plywood (opaque) + 3 mm satin acrylic (luminous)
• Cut & engraved on the xTool P2S (55 W)
• Warm LED lighting from below in the base
• Plug-in system: Levels mated to each other via Ø3.5 alignment rods (without grooves)
• Assembled by hand - also a nice, homemade gift

📄 Files: XCS/XS + PDF assembly instructions are included – clean and reusable.

—— Deutsch ——
☕ Coffee-Bar – a layered, bottom-lit LED coffee set: a moka pot, an espresso cup with saucer, and an octagon clock whose hour markers are coffee beans, all on a shared base. Wood and satin acrylic alternate layer by layer so the parts glow warmly from within. Made from 3 mm poplar plywood and 3 mm satin acrylic, cut & engraved on an xTool P2S (55W). Layers stack onto Ø3.5 mm alignment rods (slot-together, no grooves), lit warm from below and hand-assembled. Clean, reusable files (XCS/XS + PDF assembly guide) included.

👉 Build & discussion: https://www.facebook.com/lillo.vergari.9/posts/pfbid0c88iU46rWFGwfsoUVTCySDE353M5p8YXsWUKiGB9MuPThVfHruEjVnz48ChJU8Nzl