Rooster Selfie

NOTE- My laser settings will most likely differ from yours so always run test grids first. 

Mix the Titanium Dioxide (TD) in a spray bottle (I use 1tbs TD to ⅓ Cup 91% Isopropyl Alcohol with 3 drops of food coloring, doesn't matter what color its used just to be able to see if you have good coverage.  

After cleaning your tile spray wit the TD mixture and let dry - COMPLETELY

After drying carefully take tile and place in your XTool - BE CAREFUL THE TD WILL RUB OFF EASILY

Engrave image - I prepared image with above settings

Once completed just rinse off the TD with water the wash and dry.

NOTE to 5w owners, the 5w machine may be a little slower and somewhat limited but is is a tank. Don't let anyone say otherwise.