Report
![[Laser cut and engrave] Laser in use warning sign](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/c57afe8e-d7f4-4828-8342-a2b2f9102503?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Laser in use warning sign
Instruction
Laserinusesign
.xcs
Application scenario
Laser processing (16min)
Machine & module
xTool D1 Pro
5WMaterial used
wood
79
712
Information
Laser cutting is extremely useful and fun but can also be dangerous if proper safety measures aren't in place. This sing can warn others that a laser is in use and remind them to be carful and wear safety glasses before entering the room, workshop or area where there is a laser in use. Even with a fully enclosed laser it is good to let others know when it is in use and make them aware of any potential safety risks.
Instruction
1
Step1: Modify or adjust design
Preview
This design is complete and ready for cutting and engraving, but you can make some adjustments to make it a little more personalised.
The size can of course be easily adjusted to fit your use case but you could also change the fonts or add extra text.
If you add any extra elements, the outline should be deleted and then use the outline tool set to around 8mm to make the new cutting line.
2
Step2: Cutting and engraving
Preview
The settings used will vary depending the your laser and material being used but the above parameters can be used as a guide. These are for 4mm material using the xTool D1 Pro 5w.
3
Step3: Hanging
Preview
There is a small 6mm hole in the top the sign so it can easily be hung on a screw or nail.
Comments
