Black insulated mug with coffee bean motif and Sassi's Coffee logo

Information

      I have implemented my first coffee mug project with the M2 and the RA3 Lite. It is the "20oz stainless steel coffee mugs for laser engraving" from the xtool shop. Since this is my first project with coffee mugs, I used the presets of xtool. The duration with my M2 20W of just under 4 hours is unfortunately very high, but my wife was happy :-) The result is already cool.

Everything that was lasered had to be cleaned again with isopropanol and cotton swabs, as a lot of the coating is still left as traces of gunfire. Next time I would increase the laser intensity by 5% if necessary and try a small area with it beforehand.

The logo was edited in the xtool studio. This was also a new experience, such as how writing can be curved. Trying is better than studying and it worked out great.

I built a subframe to match the position with the frame (laser ride). So I was able to use the complete size. Depending on the shape of the jaws, your position will of course change, but the surface should remain identical.

I would be happy if you give me a like. Have fun with the project as a basis and good luck trying it out for yourself.