martinez1595

martinez1595

Report

[Laser cut and engrave] Strawberry Earrings Using DTF Transfer or Print & Cut — Project made with xTool F2 machine for Laser cut and engrave.

[Laser cut and engrave] Strawberry Earrings Using DTF Transfer or Print & Cut — Project made with xTool F2 machine for Laser cut and engrave.

[Laser cut and engrave] Strawberry Earrings Using DTF Transfer or Print & Cut — Project made with xTool F2 machine for Laser cut and engrave.

[Laser cut and engrave] Strawberry Earrings Using DTF Transfer or Print & Cut — Project made with xTool F2 machine for Laser cut and engrave.

[Laser cut and engrave] Strawberry Earrings Using DTF Transfer or Print & Cut — Project made with xTool F2 machine for Laser cut and engrave.

[Laser cut and engrave] Strawberry Earrings Using DTF Transfer or Print & Cut

[Laser cut and engrave] Strawberry Earrings Using DTF Transfer or Print & Cut

[Laser cut and engrave] Strawberry Earrings Using DTF Transfer or Print & Cut

[Laser cut and engrave] Strawberry Earrings Using DTF Transfer or Print & Cut

[Laser cut and engrave] Strawberry Earrings Using DTF Transfer or Print & Cut

[Laser cut and engrave] Strawberry Earrings Using DTF Transfer or Print & Cut

[Laser cut and engrave] Strawberry Earrings Using DTF Transfer or Print & Cut

Strawberry Earrings Using DTF Transfer or Print & Cut

Instruction

Strawberry Earrings dtf xcs.xcs

Strawberry Earrings dtf xcs

.xcs

Show 3 more

Application scenario

Laser processing (5min)

Machine & module

xTool F2

5W, 15W

Compatible xTool Machine

New

M2

10W, 20W

F2 Ultra UV

5W

P3

80W

F2 Ultra

40W

F1 Ultra

20W

M1

5W, 10W

D1

5W, 10W, 20W

D1 Pro

5W, 10W, 20W, 40W

P2

55W

F1

10W

S1

10W, 20W, 40W

M1 Ultra

10W, 20W

P2S

55W

Material used

1/8"(3mm) Basswood Plywood

gift

25

499

Information

      I recently created a vintage-inspired halftone DTF design featuring a classic pin-up woman enjoying strawberries while wearing adorable strawberry earrings. Rather than leaving unused space on my DTF gang sheet, I filled it with a matching strawberry design so I could create a pair of coordinating earrings to complete the outfit.

The results turned out beautifully! The matching earrings are the perfect finishing touch and really bring the whole design together.

This strawberry design is also great for print-and-cut projects using the M1 Ultra or M2 with the print modules, or for sublimation if you have a sublimation printer.

I've included the strawberry artwork so you can use it in your own projects, no matter which method you choose.

strawberry earrings

t-shirt printing

Instruction

1

Step1: Size and Print the Strawberry

Strawberry Earrings Using DTF Transfer or Print & Cut instruction: step 1 - Size and Print the Strawberry

Preview

Strawberry Earrings Using DTF Transfer or Print & Cut instruction: step 1 - Size and Print the Strawberry

Preview

The first step is to resize the strawberry graphic so it matches the vector file in xTool software.

For Print & Cut (M1 Ultra or M2 with the print modules): You're all set! The strawberry graphic is already included in the project and sized correctly. Simply follow the Print & Cut instructions for your machine.
For DTF: Resize the strawberry graphic to 1.485" W × 1.5" H, then print it on your DTF gang sheet.
For Sublimation: Follow the same sizing and printing instructions as the DTF method by resizing the graphic to 1.485" W × 1.5" H before printing.

2

Step2: Create the Jig and Cut the Earring Blanks

Strawberry Earrings Using DTF Transfer or Print & Cut instruction: step 2 - Create the Jig and Cut the Earring Blanks

Preview

Directions for DTF and Sublimation

Using the jig is optional, but I found it made aligning the design much easier.

Begin by cutting the jig, which also includes two earring blanks. If you're making multiple pairs of earrings, you only need to cut the jig once. After that, simply cut additional earring blanks and reuse the same jig for each set.

3

Step3: Align the Image to the Blank

Strawberry Earrings Using DTF Transfer or Print & Cut instruction: step 3 - Align the Image to the Blank

Preview

Place the earring blanks back into the jig. Place your image over the blank and secure in place with heat resistant tape.

4

Step4: Press the Images

Strawberry Earrings Using DTF Transfer or Print & Cut instruction: step 4 - Press the Images

Preview

Every heat press performs a little differently, so you may need to adjust the time or temperature to suit your equipment. For my setup, I used 300°F (149°C) for 15 seconds, and it produced excellent results.

Place a piece of wood or hardboard on the heat press bed, then position the jig with the earring blanks inside.

Press the design, then remove the transfer using a warm peel.

Add the earring hardware and your earrings are complete.

5

Step5: Print a Matching T-shirt or Tote Bag

Strawberry Earrings Using DTF Transfer or Print & Cut instruction: step 5 - Print a Matching T-shirt or Tote Bag

Preview

Want to create the matching T-shirt or tote bag? You can download the design from my Atomm page and make the complete coordinated set!

Here's the link: https://www.atomm.com/project/147887-vintage-halftone-design-with-pin-up-girl-with-strawberries?utm_source=copylink&utm_medium=referral&utm_campaign=sharetoearn2&utm_id=726

Comments

Remixes

License

Standard License

You may also like

wood cut earring

mandala cut earring