Laser19

Laser19

Report

[Laser cut and engrave] Miroir à effet tunnel infini avec éclairage LED bleu — Project made with xTool P2S machine for Laser cut and engrave.

[Laser cut and engrave] Miroir à effet tunnel infini avec éclairage LED bleu — Project made with xTool P2S machine for Laser cut and engrave.

[Laser cut and engrave] Miroir à effet tunnel infini avec éclairage LED bleu — Project made with xTool P2S machine for Laser cut and engrave.

[Laser cut and engrave] Miroir à effet tunnel infini avec éclairage LED bleu — Project made with xTool P2S machine for Laser cut and engrave.

[Laser cut and engrave] Miroir à effet tunnel infini avec éclairage LED bleu — Project made with xTool P2S machine for Laser cut and engrave.

[Laser cut and engrave] Miroir à effet tunnel infini avec éclairage LED bleu

[Laser cut and engrave] Miroir à effet tunnel infini avec éclairage LED bleu

[Laser cut and engrave] Miroir à effet tunnel infini avec éclairage LED bleu

[Laser cut and engrave] Miroir à effet tunnel infini avec éclairage LED bleu

[Laser cut and engrave] Miroir à effet tunnel infini avec éclairage LED bleu

[Laser cut and engrave] Miroir à effet tunnel infini avec éclairage LED bleu

[Laser cut and engrave] Miroir à effet tunnel infini avec éclairage LED bleu

Infinity tunnel mirror with blue LED lighting

Turn Materials into Light

Instruction

miroir15x15.xcs

miroir15x15

.xcs

Application scenario

Laser processing

Machine & module

xTool P2S

55W

Compatible xTool Machine

F2 Ultra UV

5W

P3

80W

P2

55W

Material used

1/20"(1.3mm) Silver to Black Laser Engraving Two-Tone Plastic Sheet

1/8"(3mm) Clear Transparent Acrylic

gift

3

464

Information

      Here is an infinity mirror that can be a night light on a table or an atmospheric night light to hang on a wall. Battery-operated, so it can be moved anywhere. The box is made of plywood and the frame is made of two-layer acrylic with SF effect.

TurnMaterialsIntoLight

Instruction

1

Step1

For this project you will need:

5 mm plywood to make the
mirror acrylic box for the
black / silver bi-layer acrylic mirror for the frame
two-way film
tape with battery or USB 60 mm minimum

https://www.reddit.com/r/xToolOfficial/comments/1ulvqws/lampe_miroir_infini/

https://www.facebook.com/groups/lasermaterials/posts/1308599167922165

2

Step2

Infinity tunnel mirror with blue LED lighting instruction: step 2 -

Preview

Infinity tunnel mirror with blue LED lighting instruction: step 2 -

Preview

1 - uncut the box and assemble it

2 - engrave and cut out the frame and sides

3 - glue the sides to the box. Be careful, two sides are larger than the other two. Put the shorter sides on each side of the box, the longest sides at the top and bottom of the box.

4 - Insert the acyl mirror at the bottom of the box, then put double-sided on the battery box. Install it in the slot provided for it and stick it to the mirror.

5 - Slide the LED strip over the mirror and glue the strip all the way around the box. Cut the strip into excess

6 - Cut the transparent acrylic

7 - Place the two-way film on the transparent acrylic by moistening the acrylic, make sure that there is no bubble

8 - Glue the transparent acrylic on the box

9 - Glue the engraved frame on the transparent acrylic.

Comments

Remixes

License

You may also like

led night light