Report
![[Laser cut and engrave] Fall Welcome Hanger](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/b2a6214b-5ff4-4ada-88d1-a6aefd72d98a?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Fall Welcome Hanger](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Fall Welcome Hanger](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/b2a6214b-5ff4-4ada-88d1-a6aefd72d98a?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Fall Welcome Hanger](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/afa336b9-f0da-4013-8ffa-76e5d4e357de/_DesignFind Template (28).png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Fall Welcome Hanger](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/f035221a-e13c-4258-a681-d4a8b5948c9f/5F02B7CB-FAFC-44E9-9B87-1930603DCE81_1_102_a.jpeg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Fall Welcome Hanger
Instruction
Fall Welcome
.xcs
Application scenario
Laser processing (45min)
Machine & module
xTool M1
10WCompatibles · 13
Material used
1/8"(3mm) Basswood Plywood
66
810
Instruction
1
Step1: Open the File and Pick an Option
Preview
- Open the file XCS
- When I was designing this I thought hey this would look good either way so I kept the option open for it to go either way.
- This design was really simple to make
- I brought in a lot of fall graphics and united them to a frame held together by the outline of “welcome”
2
Step2: Option 1: Backing Board
Preview
I made two options for this file.
The first option has a backing board that you can glue the the layers on.
3
Step3: Option 2: Just the Cut out
Preview
The second option is like how shown in the photos.
I shouldn't have stained this so dark, I didn't take into consideration my dark door or could have gone back and cut the backer board and done the 1st option.
4
Step4: Laser
Preview
- Auto measure you material
- make sure all objects are set to cut
5
Step5: Paint & Assembly
Preview
Preview
I wanted to keep this really simple
I would do this differently I would have just left the frame bare and just stained the welcome rather than the final way shown in photos.
But I love there are so many things you can do with this design! Have at it!
Comments
