stephcreated

Report

Haunted House Hanger

Instruction

Haunted Welcome Hanger

.xcs

Application scenario

Laser processing (120min)

Machine & module

xTool M1

10W

Compatibles · 12

Material used

1/8"(3mm) Basswood Plywood

659

Information

      Spooky season is upon us! Share you love for the season with this door hanger!

Preview

Preview

Create a diameter 11.5"
Create another diameter 10.5"
Select both objects and align center
With them both selected on the right side panel click “make compound vector”
Next, go into the shapes panel on the left and go under festival
- Select the one of the haunted houses
- Create a small circle and overlap it with the bottom of the haunted house as shown in the second photo
- Select only the house and the circle and click unite
Align the house at the bottom of the circle like shown in the 3rd photo
- Select the house and circle frame and click unite at overlap
- And select them both again and select unite

Preview

Create a diameter 11.5"
Create another diameter 10.5"
Select both objects and align center
With them both selected on the right side panel click “make compound vector”
Create text
- use cursive font
- arch the text using the arch symbol to the right of the text
- weld the text together
Right click, make a copy of the text and paste off to the side
Go back to the first text and place of the bottom of the frame in the center you can select both objects and vertically align
- Once you have it where you like select both objects and "unite'"

Preview

Under festival you can add some more graphics to your project.
- Bats, witch, ghosts, etc.
Make sure all objects are set to cut
Auto measure you material.

Preview

Paint your project as you choose.
- Glue the middle frame on top of the back board
- Glue your front frame on top of the middle board
- Making sure all sides are flush when gluing these parts
Glue your welcome on top of the front frame outline of welcome
Add the other graphics you may have cut out.

Comments