Custom Bookmark

For this project, you'll need to change the name to fit your own. I chose "Drew" for my project, but you can easily change it. After that, align the name on your business card, and you'll be done with the design phase.

For this, I used an XTool business card and chose a red one. You can use any color you like; just make sure you know the best settings for your business card.

Now it's time to use the laser. Make sure to wear your laser safety glasses and do a test run on the cutting, as the settings may vary depending on the color. I found that my initial settings were a bit weak, but the final result still turned out well.

Good news! You're done with your custom bookmark. Great job!