Report
![[Laser cut and engrave] Grandparents Ornament](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/be20fa7e-0ef9-4528-bfb2-19ff6a73b844?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Grandparents Ornament](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Grandparents Ornament
InstructionYearBecameGrandparents
.xcs
Application scenario
Laser processing (20min)
Machine & module
xTool M1
10WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
54
495
Instruction
1
Step1: The Design
Preview
- Start with a 4" diameter
- set to “cut”
- Create your text and set to “engrave”
- Create a circle at top for ribbon and set to “cut”
- Create a heart shapes
- create an outline of the heart
- make sure all hearts are set to "cut'
2
Step2: Laser
Preview
- Add your material to you machine and auto measure
- If you made any changes to the file make sure all all your settings are correct
3
Step3: Paint & Assembly
Preview
- Not a lot to do but grab a paint pen and some ribbon
- Paint your heart
- Tie your heart through your ribbon so it hangs down from the top of the ornament
Comments
