Report

[Laser cut and engrave] School Checklist — Project made with S1 machine for Laser cut and engrave.

School Checklist

ID 15440

Instruction

Files

Original files

AuthorS1 · 3mm plywood

Add Make Profile

Same design, different machine, material, or any improvement · Earn 100 Credits

Tips for a great Make Profile →

160

4091

Information

      This is a wooden checklist to make sure you children have what they need before going out the door. It is made out of 3mm plywood, card board. There are 3 layers of plywood and a layer of cardboard to add space for the answers to slide.

Bingo Party

Back to school checklist

School Check list

Back To School

Instruction

Step1: Cutting out the front can be done on a pre painted piece of 3mm plywood. Settings will need to be tested for MDF

Preview

The Check list front also has the slides on that panel.

Step2: middle and back

The middle piece and back pieces are cut from a 12" x 19" piece of 3mm unfinished Plywood. Once cut out they can be glued together.

Step3: Cardboard filler layer

The cardboard layer is a filler so the answer slide move freely. The setting I used were for a cereal box.

Step4: final assembly

Preview

With the back and center piece glued together, wax the slide pieces and put the slides place. Then glue the cardboard filler and front on. I also included a file for a hanger and feet to glue on the back.

Comments