Personalized Dinosaur Themed Name Sign for Kids Room

The original design was created using the excellent layered projects assistance available in xtool. I slightly reduced the size from 250mm width to 200mm as I think this is a better size for a child's beroom door. 

Originally I tried using inkjet printing directly onto my 3mm basswood. However, the colours were just too muted. So I used Evergreen Goods White Glossy Sticker paper to cover the wood. This printed brilliantly as can be seen in the Image. 

Finally I used a piece of Cherrywood plywood (3mm) to create the top frame. However, it could easily be left, stained or painted (I use acryllic paint usually).

Enjoy!