Report
![[Laser cut and engrave] Summer Mountain Bike Suncatcher](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/564ae0c0-b35f-4205-9ea1-d9d76b34d642?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Summer Mountain Bike Suncatcher](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Summer Mountain Bike Suncatcher
InstructionMountain Bike Suncatcher_flex
.xcs
Show 1 more
Application scenario
Laser
Machine & module
xTool M1
10WCompatibles · 3
Material used
3mm MDF
60
1194
Instruction
1
Step1: Cut Front and Back
Preview
Since this is a layered project, you will need to cut 1 image normally, and then a second image mirrored. *I applied 3M tape to the MDF before cutting.
2
Step2: Cut Transparent Material and Assemble
Preview
The flex material is very thin acrylic. Using the M1 diode laser, the best way to cut this material is to lay a piece of paper underneath it. I use power 75, speed 10, and 3 passes but the idea is to use a lower power and multiple passes so that you don't melt it.
Once you have the flex cut out, remove the 3M paper from your MDF cutouts and sandwich the flex in the middle. Add a hanger using string or fishing line.
Comments
