Report

[Laser cut and engrave] Boo - Halloween Door Hanger — Project made with S1 machine for Halloween.

Boo - Halloween Door Hanger

Instruction

Halloween Door Hanger 2

.xcs

Application scenario

Laser (20min)

Machine & module

xTool S1

20W

Compatible xTool Machine

F2 Ultra UV

F2 Ultra（Single）

F2 Ultra

F1 Ultra

F1 Lite

P2S

M1 Ultra

D1 Pro 2.0

D1 Pro

Laserbox

Material used

1/8"(3mm) Basswood Plywood

3mm Basswood Plywood

320

3646

Information

      Enchanted 3-Layer Halloween Door Hanger

Add a touch of magic to your Halloween decor with this beautiful, 3D door hanger. Cut from your choice of material, including wood, MDF, acrylic, paper, or cardboard, this design features a pumpkin, bat, ghost, and a playful "Boo" sign, creating a spooky and enchanting atmosphere.

Key Features:
3-layer design: Ensures maximum detail and accuracy.
Versatile materials: Cut from a wide range of materials, including wood, MDF, acrylic, paper, and cardboard.
Easy to assemble: Detailed instructions are below.
Perfect for both beginners and experienced makers.

Download this digital design file today and start creating your own enchanted Halloween door hanger!

Instruction

Step1: Using xTool Creative Space

Preview

Switch on the machine, open xTool Creative Space on your computer, drag in the required XCS file, 300*600*3mm Plywood board into the machine, refresh the page, click on ranging, adjust the parameters, and get ready for cutting. When using the S1 machine, you need to turn on the air pump to prevent the board from yellowing and discoloring during laser cutting.

BLACK LAYER

Make sure you opened "Layer and Object List” by clicking on the Icon on the bottom left of the screen.
Select the black layer (this layer contains the path for cutting).
Set the processing type of the black layer to Cut.
Click on “EasySet panel” to open the power and speed settings for the selected layer.
Set the Power (S1-20w: 100)
Set Speed (S1-20w: 5)
Set Number of Passes (S1-20w: 1)