![[Laser cut and engrave] Flower Tumbler](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/f6d79e96-0871-49b6-be4f-1bed536358d9?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Flower Tumbler](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Flower Tumbler](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/f6d79e96-0871-49b6-be4f-1bed536358d9?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Flower Tumbler](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/91562103-d753-4880-ab44-751d48319e62/PXL_20240807_203319786.gif?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Flower Tumbler](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/d9a2478b-0ab7-4f0e-8247-0d4b36d8d19b/PXL_20240807_203005323.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Flower Tumbler
Instruction
Information
This work was designed for a person who wanted to give another look to their water tumbler. The person wanted a floral design where the beauty of their name could be highlighted within a floral arrangement.
Instruction
Step1: Design
In the first step of the design I added an already worked image previously created especially for this tumblr, I cropped it so that it would not lose quality and I sized it to the size of the glass, after that I vectorized it, modified it and added the name space.
Step2: Process
I did not use the values of the material used, at the time of engraving and marking the tumbler, but for everything I gave it a power of 50% when the material gave me 30%, but I decided to use 50% power for a better result, in general all that changes and depends on the material to be used, after adding all the engraving and marking processes I decided to process it, verifying that the height was adjusted correctly.
Step3: Finish
To finish, I just cleaned it and here we can see the final result.
