Report
![[Laser cut and engrave] Grateful, Thankful, Blessed, Pumpkin Standee](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/1b252b7b-fd80-4010-8ca3-af86617c55bb?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Grateful, Thankful, Blessed, Pumpkin Standee](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Grateful, Thankful, Blessed, Pumpkin Standee](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/1b252b7b-fd80-4010-8ca3-af86617c55bb?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Grateful, Thankful, Blessed, Pumpkin Standee](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/595d8b0d-ece1-4177-8748-b9130c7d8c55/_DesignFind Template (7).png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Grateful, Thankful, Blessed, Pumpkin Standee
Instruction
PumpkinStandee
.xcs
Application scenario
Laser (90min)
Machine & module
xTool M1
10WCompatibles · 13
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
23
567
Information
Decorate your home for Thankgsiving with this cute decorative standee.
Instruction
1
Step1: Open File in XCS and send to laser
Preview
- Open the file and prep to send to laser
- Red= Cut
- Black = Score
- Make sure all your material and cut settings are correct
- Auto measure your material
- I ended up cutting out the base twice for a snug fit
- I think I went back and added it twice in the file.
2
Step2: Paint & Assembly
Preview
Preview
Grab your paint and paint your pumpkin standee.
I used this color shot spray paint for the pumpkins and also some spray paint for the letters.
the letters are very fragile. I like using these cursive letters but feel free to change the font if you arent comfortable handling the letters.
I use some foam tip stick I get from Amazon for applying wood glue on these thin letterings.
Comments
