Report
![[Laser cut and engrave] Paw Angel Ornament](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/eb5d1a12-96a1-4c81-9910-052e33d8f6bb?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Paw Angel Ornament](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Paw Angel Ornament
InstructionPawWingsOrnament
.xcs
Application scenario
Laser (45min)
Machine & module
xTool M1
10WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
87
585
Instruction
1
Step1: Open file in XCS
Preview
- Open the file in XCS
- Purple= Score Blue=Engrave Red= Cut
2
Step2: Laser
Preview
- Prep your laser and material
- Change the engrave settings for text if you want a deeper engraving
- auto measure your material
3
Step3: Paint & Assemble
Preview
- Gran some paint pens, acrylic paints, or spay paint and paint your project
- Glues the pieces of your project together.
- NOTE:
- Before gluing the paws on make sure its the ones that fit inside of the angel wing by testing them all out by placing them inside the wing before gluing them down.
Comments
