Report
![[Laser cut and engrave] Welcome Skeleton Door Hanger](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/f474d111-b60e-4724-9c5f-561234bb5b47?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Welcome Skeleton Door Hanger](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Welcome Skeleton Door Hanger
InstructionSkeleton Welcome Hanger
.xcs
Application scenario
Laser (60min)
Machine & module
xTool M1
10WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
125
1689
Information
Make your front door more deadly with this skeleton hanger
Instruction
1
Step1: Open in XCS and prep for laser
Preview
- Open the file.
- Because I have an M1 i'm limited on size so this is a fairly small door hanger. If you have a bigger machine feel free to resize to your liking
- Resize the whole image by clicking it and dragging the corners diagonally
- Once you have the size you like, right click on the text, copy, paste, and set to “cut”
- Auto meausure your material and send to your the laser
2
Step2: Paint and assembly
Preview
Preview
Preview
Preview
- Paint your skeleton
- I used spray paint for both the skeleton and the letters
- I used a paint pen to fill in the tiny drips of the letters that did not cut out.
- Glue your letters within the scored lines
Comments
