Messerschmitt Me163 Comet Jet Fighter WW2 Rocket Plane

Anleitung german / Instructions english below

Cut out/engrave the aircraft fuselages and glue them together. Cut/engrave one side of the wings, then turn the wings over and engrave the back. The wing size differs slightly, because the real plane was "bulbous", please don't be surprised.

When this is done, insert wings into the fuselage and also glue them with wood glue.

Both times it is the same version of the Me163, but with small changes like the propeller only on the 2 middle parts and not on all 4 fuselages.

Personally, I think version 2 is better. Badges/templates can also be found in the 2nd workspace sheet if you want to make changes.

I painted my Messerschmitt with model paint, I'm sure you can do better ;-)

_________________________________________________________________________________________________

Instuctions deutsch:

Cut/engrave the airplane fuselages and glue them together. For the wings, cut/engrave one side, then turn the wings over and engrave the back side. The wing size is slightly different because the real airplane was "bulgy," so please don't be surprised.

Once this is done, insert the wings into the fuselage and also glue them firmly with wood glue.

Both times it is the same version of the Me163, but with small changes such as the propeller only on the 2 middle parts and not on all 4 fuselages.

Personally, I find version 2 better. Badges/templates can also be found on the 2nd worksheet in case you want to make changes.

I painted my Messerschmitt with model paint, you can certainly do that better ;-)