Report
![[Laser cut and engrave] Hocus Pocus 3D Pumpkin](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/e07a9ffc-f00e-48de-b733-9862e6558187?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Hocus Pocus 3D Pumpkin](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Hocus Pocus 3D Pumpkin
Instruction3D Witch Pumpkin
.xcs
Application scenario
Laser (45min)
Machine & module
xTool M1
10WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
57
715
Information
Show off your Halloween spirit with this 3D Hocus Pocus Pumpkin
Instruction
1
Step1: Open in XCS
Preview
- Open the file
- This whole file will be cut only,
2
Step2: Send to laser
Preview
- Auto measure your material before sending to laser.
3
Step3: Assembly & Finishing Touches
Preview
Preview
- Put the pieces with the biggest middle slot on top of the one with the small slot
- I used 3mm basswood and left it bare.
- This would be great with some stain or even some black, purple, orange acrylic.
Comments
