![[Laser cut and engrave] Apple in My Eye Wooden Jewelry Box](https://image-res.xtool.com/ali-res%2Fxcs%2F41b75e62-497b-4e93-81d1-264f7201abc9.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Apple in My Eye Wooden Jewelry Box
Instruction
Information
Instruction
Step1
Based on your own needs,add more layers of basswood on the base to make the storage space bigger. Sponges and foams can be used to fill the jewelry case to make it easier to place different accessories.
STEP1. Import designing documents and verify the size, processing position and processing mode.
Attention:The documents of pictures are designed by 3mm basswood plywood and mahogany plywood. If the types and thickness of materials you choose are different from that, please adjust the laser processing parameters according to the actual material.
Step2
STEP2. Put basswood plywood and mahogany plywood in the laser device one by one. Then cut plywood and engrave the basswood plywood by laser
Attention：The laser parameters marked here are for the current case.
Step3
STEP3. Assemble the baseThe jewelry box is glued by the carpenter's glue, with the mahogany plywood as the bottom layer and then three layers of basswood plywood are laminated.
Step4
STEP4. Assemble the topFind the carved lid and glue a layer of openwork basswood plywood followed by a layer of inner ring wood strips to facilitate the alignment of the lid to the base.
