![[Laser cut and engrave] Summer Ruler](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/c967a5bc-b193-4e10-9e38-65d52448cfd6?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Summer Ruler](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Summer Ruler](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/c967a5bc-b193-4e10-9e38-65d52448cfd6?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Summer Ruler](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/12cdd433-1833-4b27-b45b-5171ac565aec/PXL_20240731_143116713.PORTRAIT.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Summer Ruler
Instruction
Instruction
Step1: Desing
In this process, I started by designing the ruler, generally the rules are totally rectangular, but to make it different I added a curve, after that I added the measurement lines in mm and cm, after finishing it I added the word summer and the figure of a palm so that it would be associated with the word theme of this ruler.
Step2: Plywood Preparation
I decided to use a scrap of wood that I had left, since the ruler is 20.5 cm in that work space I could do it, at first I decided to paint it with white spray, I waited for it to dry, I placed it and arranged it on the work table
Step3: Process
Once the wood was ready, I set the parameters and started the work.
Step4: Finish
After engraving and cutting, this is the final result. I like to work the wood before cutting it to avoid having to paint or to make the engraving less noticeable.
