Report
![[Laser cut and engrave] Bird House and Feeder for window](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/1016769e-febb-424c-baa7-8e910be35c9e?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Bird House and Feeder for window](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Bird House and Feeder for window](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/1016769e-febb-424c-baa7-8e910be35c9e?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Bird House and Feeder for window](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/f55b9bdb-5ea7-487e-8a06-aeacada11509/20240729_113020.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Bird House and Feeder for window
Instruction
bird home
.xcs
Application scenario
Laser (2min)
Machine & module
xTool S1
40WCompatibles · 13
Material used
1/8"(3mm) Basswood Plywood
131
1786
Information
I love watching the birds and came up with this bird house/feeder to hang from the window. The birds love it!
Instruction
1
Step1: Seperate the pieces for cutting.
Ready to build Bird House/Feeder. Simply engrave/cut the pieces then glue them together like a 3D puzzle. This project can be built by simply looking at the pictures. It may look complicated but is very simple to figure out what goes where. I you have not noticed from the pictures, the windows and Bird Holes have cut-out's that get glued on them for that pop out look. You can change the names and signs to fit your needs. Hope you enjoy it.
Comments
