Report
![[Laser cut and engrave] Wooden triple star earrings](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/81393a67-c9bd-4c1a-b78a-934d3ce284b1?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden triple star earrings](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Wooden triple star earrings](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/81393a67-c9bd-4c1a-b78a-934d3ce284b1?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden triple star earrings](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/bc0f5c9c-9b4e-485b-9774-0eb2d488a1e3/IMG_2358.jpeg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden triple star earrings
Instruction
Triple star earings
.xcs
Application scenario
Laser (12min)
Machine & module
xTool D1 Pro
5WMaterial used
4mm cherry plywood
265
1688
Information
These earrings are fast and simple to make from any material.
Instruction
1
Step1: Design
Preview
These earrings can make by using the built-in star shape in XCS and then adding 2-3mm circles to attach the jump rings that will hold them together.
The sizes of each star can be adjusted depending on personal preference.
2
Step2: Materials
Preview
I used 4mm cherry plywood to give a natural look but you could also use coloured acrylic to give a brighter appearance.
The ear hooks and jump rings can be easily found online on websites such as Amazon. I would recommend getting a set of jump rings than includes a verity of sizes to make sure you have best size to join each of the stars together.
3
Step3: Cutting
Preview
It took around 5 minutes to cut all three stars using a 5w xTool D1 Pro with the settings listed above.
Comments
