scrapbookmemories

举报

[Laser cut and engrave] Small coaster stand for 100mm slate coaster — Project made with xTool M1 machine for Laser cut and engrave.

[Laser cut and engrave] Small coaster stand for 100mm slate coaster — Project made with xTool M1 machine for Laser cut and engrave.

[Laser cut and engrave] Small coaster stand for 100mm slate coaster — Project made with xTool M1 machine for Laser cut and engrave.

[Laser cut and engrave] Small coaster stand for 100mm slate coaster — Project made with xTool M1 machine for Laser cut and engrave.

[Laser cut and engrave] Small coaster stand for 100mm slate coaster — Project made with xTool M1 machine for Laser cut and engrave.

[Laser cut and engrave] Small coaster stand for 100mm slate coaster — Project made with xTool M1 machine for Laser cut and engrave.

[Laser cut and engrave] Small coaster stand for 100mm slate coaster — Project made with xTool M1 machine for Laser cut and engrave.

[Laser cut and engrave] Small coaster stand for 100mm slate coaster — Project made with xTool M1 machine for Laser cut and engrave.

[Laser cut and engrave] Small coaster stand for 100mm slate coaster

[Laser cut and engrave] Small coaster stand for 100mm slate coaster

[Laser cut and engrave] Small coaster stand for 100mm slate coaster

[Laser cut and engrave] Small coaster stand for 100mm slate coaster

[Laser cut and engrave] Small coaster stand for 100mm slate coaster

[Laser cut and engrave] Small coaster stand for 100mm slate coaster

[Laser cut and engrave] Small coaster stand for 100mm slate coaster

[Laser cut and engrave] Small coaster stand for 100mm slate coaster

100毫米板岩过山车的小型过山车架

教程

Coaster small stand.xcs

Coaster small stand

.xcs

应用场景

激光 (15min)

机器与模块

xTool M1

10W

使用的材料

3mm椴木胶合板

3毫米胶合板

3毫米椴木胶合板

gift

1514

6752

信息

      作为一个小型石板过山车台，展示你的作品。用你最喜欢的特色石板雕刻雕刻，制作你自己的小支架，共9套支架。

教程

1

步骤1: 打开文件，添加设置

100毫米板岩过山车的小型过山车架 instruction: step 1 - 打开文件，添加设置

预览

100毫米板岩过山车的小型过山车架 instruction: step 1 - 打开文件，添加设置

预览

如果你用的是其他型号的Xtool机器，可能需要在Easypanel上填写。20瓦时，使用60%速度，10毫米/秒，开启空气助推。

档案由9组小支架组成。如果你只需要一组，直接在 Easypanel 里关闭输出就行。

2

步骤2: 组装时只需将两个部件连接起来。

100毫米板岩过山车的小型过山车架 instruction: step 2 - 组装时只需将两个部件连接起来。

预览

每个部分需要两个部分拼接起来组成支架。

3

步骤3: 如果需要，可以加胶水。

100毫米板岩过山车的小型过山车架 instruction: step 3 - 如果需要，可以加胶水。

预览

100毫米板岩过山车的小型过山车架 instruction: step 3 - 如果需要，可以加胶水。

预览

将两部分连接后，可以涂抹一小块胶水以防止脱落。

评论

二创

许可证