Geometric Dreamcatcher

Instruction

Attrape rêves géométrique

.xcs

Application scenario

Laser processing

Machine & module

xTool P2

55W

Compatibles · 13

Material used

1/8"(3mm) Basswood Plywood

496

Information

      🌿 Geometric Dreamcatcher 

An elegant and modern creation inspired by bohemian dreamcatchers, mixing geometric shapes and delicate feathers for a refined wall decoration 

⚙️ Features
✔ Compatible with laser cutting and engraving
✔ Slim and detailed design
✔ Clean, ready-to-use vector file
✔ Possibility of double-sided 😊 mounting
✔ Light and airy effect when assembled

📏 Dimensions
✔ Dreamcatcher mounted: approx. 70 cm

🎨 File color codes

🔴 Red = Cutout
🖤 Black = Engraving

(colors can be changed according to your software)

🪵 Recommended materials

• 3 mm basswood plywood
• Fine MDF
• Light wood for a natural, bohemian look

⚙️ Settings used (xTool S1 40W)

✔ Cut: 70% – 15 mm/s – 2 passes
✔ Engraving: 50% – 250 mm/s – 1 pass

⏱ Estimated time

✨ About 1 hour and 15 minutes for one side

(time may vary depending on machine, material and dimensions used)

https://www.facebook.com/groups/317165524023485/posts/866827619057270
✨ Creation: Atelier d'Elsa

Instruction

Step1

🌿 Realization tip

To obtain this contrasting and elegant rendering, I personally painted one side of my board blue before cutting, while leaving the other side natural 😊

This allows, once the elements are assembled on both sides, to obtain a nice mix between raw wood and colored touches, with a very warm bohemian effect.

For the finish, I also added some rhinestones to bring a little bright and refined ✨ touch

(see photo of the final rendering)

Comments

Remixes

License

CC0