Report

[Laser cut and engrave] Beleuchtetes Miniatur-Wandhaus - Teelichthaus — Project made with xTool S1 machine for Laser cut and engrave.

Illuminated Miniature Wall House - Tealight House

Atomm Featured

Instruction

Dorf Haus 1

.xcs

Application scenario

Laser processing

Machine & module

xTool S1

20W

Material used

3mm Linden Plywood Panels

130

1298

Information

      We have designed a beautiful illuminated miniature wall house.
It can be used as a night light, tea light or as a decorative wall object. 
The tea light is placed under the base plate in the screw device and can be removed at any time. Since this object is a flammable material, no tea light with an open flame may be used.
We hope you enjoy our new creation.

Instruction

Step1: Assembly instructions

Preview

8 More images

Structure according to the figure above

Step2: Fence and wall optics part

Preview

Insert
the fence into the floor plate as shown in the picture Wall optic part can be glued to the front of the house at the bottom left

Step3: Screwing device for tealight

Preview

Please take into account first the red circle, then glue the green circle. The three small dots indicate the correct
fit.At the bottom plate on the underside.
With the screw cap, one side is for the circles and the other side for the handle.
Again, red then green and pay attention to the small dots

Comments