![[Laser cut and engrave] Para Mamá lámpara de mesa rectangular con patrón de flores caladas](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/77f1aae6-6ef6-4477-9041-72bb215937dc.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
For Mom rectangular table lamp with openwork flower pattern
Instruction
Information
On the occasion of the Mother's Day contest at Atomm, I have created a rectangular table lamp with an openwork flower pattern. #2026mothersdaycontest
Previously I posted a box with the same openwork pattern for another gift to mom, and now I wanted to complete the outfit. I'm sure she's going to love this lamp too.
The process is very easy, my machine is an Xtool D1 PRO 20W, the material is 3mm poplar wood.
I have cut 4 identical pieces with the openwork flower pattern, from the same program as Xtool, it is very easy to use. I used it to make the jewelry box.
Once cut, I have measured the total with the side pieces glued together and I have cut the base with the same material leaving a few millimeters of margin, with the same wood.
For the interior, I have glued some custom sheets on tracing paper, to better diffuse the light, inside I have put an LED lamp, in my case I have put a tonality of warm light, if you wish you can paint the wood, I wanted it natural, and I have left it unpainted, I think it is a success.
You can see the result on my Instagram @elgatpentino, I hope you like it and you are encouraged to do it, your moms will love it or it can also be a nice gift for whoever you want.
Instruction
Step1
On the occasion of the Mother's Day contest at Atomm, I have created a rectangular table lamp with an openwork flower pattern.
Previously I published a box with the same openwork pattern for another gift to mom, and now I wanted to complete the set. I'm sure she will love this lamp too.
The process is very easy, my machine is an Xtool D1 PRO 20W, the material is 3mm poplar plywood. IGNORE THE LETTERS IN THE FILE, IT'S JUST INFORMATION.
I cut 4 identical pieces with the openwork flower pattern, from the same Xtool program, it's very easy to use. I used it to make the jewelry box.
Once cut, I measured the total with the side pieces glued together and I cut the base with the same material leaving a few millimeters of margin, with the same wood.
For the interior, I have glued some custom sheets on tracing paper, to better diffuse the light, inside I have put an LED lamp, in my case I have put a tonality of warm light, if you wish you can paint the wood, I wanted it natural, and I have left it unpainted, I think it is a success.
You can see the result on my Instagram @elgatpentino, I hope you like it and you are encouraged to do it, your moms will love it or it can also be a nice gift for whoever you want.
