Personalized Family Figurine with Name on Wooden Base

Information

      The figure consists of several layers of 3mm plywood.  
I took a record that used to belong to a cupboard.  
That's why it has a dark brown wood look.  
Since the foil was only on one side of the wood, I lasered a part in the right look and a part in the mirrored look.  
So that I have the foil from the front and back. If you don't work with foiled wood, you don't have to pay attention to it. For the bottom I also glued 2 pieces so that the foil can be seen at the top and bottom. The name Liam is made of black acrylic, which had a silver layer. If you laser it from the black side, you have to laser the name mirrored so that the silver layer is written the right way around at the top. I sprayed the 3 individual figures with acrylic varnish and they were cut from plywood without foil. Everything was glued with superglue. The name in the middle is a bit heavy and glue can get on the other parts. You can wipe off the acrylic with a cloth and disinfectant. For the other parts, you may have to brush again.