Denim Tote Bag with Colorful Felt Flower Applique

https://www.pinterest.com/pin/1058768193666876779/

1. Prepare the Design
   • Import flower and leaf shapes into xTool Studio.
   • Adjust the size and layout as desired.
2. Set Up the Machine
   • Install the blade suitable for cutting felt.
   • Place the xTool Sticky Mat onto the xTool Baseplate.
   • Position the 1mm felt sheet securely on the sticky mat.
3. Cut the Felt
   • Select appropriate cut settings for 1mm felt.
   • Run a test cut if necessary.
   • Each piece has its own canvas, make sure to select the desired Canvas before processing
   • Proceed with cutting the flower and leaf shapes.
4. Remove and Prepare Pieces
   • Carefully remove the cut felt shapes from the mat.
   • Trim any loose fibers if needed.
5. Arrange on the Bag
   • Place the felt flowers and leaves onto the denim tote bag.
   • Adjust positioning until the desired layout is achieved.
6. Attach the Felt Pieces
   • Option A – Fabric Glue:
     Apply fabric glue to the back of each piece and press firmly onto the bag. Allow adequate drying time per manufacturer instructions.
   • Option B – Sewing:
     Sew each piece onto the bag using a needle and thread for a more durable finish.
7. Final Check
   • Ensure all pieces are securely attached.
   • Allow glue to fully cure or secure all stitches before use.

Notes:

• Always test cut settings before full production.
• Ensure the felt is firmly adhered to the mat to prevent shifting.
• For best results, use even pressure when applying glued pieces.