Report

[Laser cut and engrave] Dual Slot Business Card Alignment Tray — Project made with xTool F1 machine for Business.

Dual Slot Business Card Alignment Tray F1

Instruction

Business Card Jig

.xcs

Application scenario

Laser processing (14min)

Machine & module

xTool F1

10W

Compatible xTool Machine

3W, 10W, 20W

F2 Ultra UV

5W, 15W

5W, 80W

F2 Ultra

40W, 60W

F1 Ultra

20W

5W, 10W

2W, 5W, 10W, 20W

D1 Pro

2W, 5W, 10W, 20W, 40W

55W

2W, 10W, 20W, 40W

M1 Ultra

10W, 20W

P2S

55W

F2 Ultra (Single)

60W

Material used

1/8"(3mm) Black Acrylic

712

Information

      Once the jig is in, your digital template and physical cards are locked. You can swap cards in and out in seconds without touching the "Frame" button.

Instruction

Step1: Cut the Base Plate

Cut a square from your Black Acrylic.

Step2: Cut the Top "Nest" Layer

Cut another square with two pockets.

Step3: Permanent Assembly

Apply Gorilla Gel Super Glue to the back of the nest layer. The gel is essential here because it won't run into your pockets, ensuring the cards sit perfectly flat on the base. Press the two layers together for a permanent tool.

Comments