Report
![[Laser cut and engrave] Beware of the puppy wooden sign](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/d985a153-ae49-4f9f-9037-c4345fd8672d?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Beware of the puppy wooden sign](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Beware of the puppy wooden sign](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/d985a153-ae49-4f9f-9037-c4345fd8672d?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Beware of the puppy wooden sign](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/1176ace5-ab66-419c-b9dc-0ccb14b1ffb9/IMG_2123.jpeg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Beware of the puppy wooden sign](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/897e482a-15a6-4b0f-bae4-acae67ae0c54/IMG_2125.jpeg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Beware of the puppy wooden sign](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/e8bc9fdb-09de-43be-9150-d5efc802b600/IMG_2124.jpeg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Beware of the puppy wooden sign
Instruction
Beware of the puppy sign
.xcs
Application scenario
Laser (20min)
Machine & module
xTool D1 Pro
5WMaterial used
4mm MDF
47
718
Instruction
1
Step1: Material
Preview
I used 4mm MDF for this design as it gives a nice contrast of colours for the dog picture when engaged.
If you plan on using this sign outside you could engrave this design on a different wood or acrylic instead.
2
Step2: Cutting
Preview
The red layer in this file is the cut line.
3
Step3: Engraving
Preview
These are the settings I usually use for engraving MDF using the xTool D1 Pro 5w as they give a good result while being relatively fast.
Comments
