![[Laser cut and engrave] Pool Levels](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/6933b557-6be4-4c61-a2bb-13f294c8122d?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Pool Levels](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Pool Levels
Instruction
Information
If you own a pool, you know you need to keep it in balance, and sometimes it's hard to remember the right levels. I kept looking them up, so I made this sign.
83/312
Instruction
Step1: Design 1
To make the sign, I just imported a frame, added an outline, and set that outline to cut. Then I added all of the data fields for my pool, which is a plaster pool. Lastly, I added two circles on the top and combined the outer circle with the outline.
Step2: Design 2
Now it's your turn. You need to visit this link to find your pool's levels. Then you will need to replace the details for your pool.
Step3: Material
For this, I just used basswood as it is not an important piece that I will be showing often and will be living in my shed.
Step4: Laser time
These settings are for an S1 40-watt machine, so you might need to change them to fit your machine and material. Also, don't forget your laser safety glasses.
Step5: You're Done
You're done, and you won't need to worry about forgetting your pool's recommended chemicals again.
