Report

[Laser cut and engrave] Acrylic shed door catch — Project made with xTool D1 Pro machine for Laser cut and engrave.

Acrylic shed door catch

Instruction

door catch

.xcs

Application scenario

Laser (10min)

Machine & module

xTool D1 Pro

Compatibles · 1

Material used

3mm Black Acrylic (for Slide Extension)

585

Information

      I recently needed a new door catch for the garden shed and decided to make my own instead of ordering online and waiting for shipping. This is a nice example of how a laser cutter can be useful for quickly creating little things in everyday life that would be very difficult or even impossible with other tools.

Instruction

Step1: Size and material

Preview

I used acrylic for this project so that it will not be harmed by water and will never need painting. The exact thickness of the material does not matter, I used 3mm as it is all I had some spare sheets and my 5w laser takes a very long time to cut thicker acrylic.

The sizing in the design should be fine for most situations but you can adjust the size of the crew holes if needed. 2 of the parts should have a hole the size of the screw threads and one part will need a larger hole to fit the head of the screw.