![[Laser cut and engrave] Engraved Yeti Rambler 10 oz. Lowball Tumbler](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/d1edb4d5-9dc9-4df1-b4bb-7ed6b1943b87?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Engraved Yeti Rambler 10 oz. Lowball Tumbler](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Engraved Yeti Rambler 10 oz. Lowball Tumbler](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/d1edb4d5-9dc9-4df1-b4bb-7ed6b1943b87?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Engraved Yeti Rambler 10 oz. Lowball Tumbler](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/39ab3286-30a6-466d-be91-9165c67ee875/Photoroom_20240613_120358.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Engraved Yeti Rambler 10 oz. Lowball Tumbler
Instruction
Instruction
Step1: Create a rectangle that is 282 x 73 mm
Designed using images from XCS software.
Can be adapted for use with any images available.
Step2: Add lattice/plaid image from shapes menu
Designed using images from XCS software.
Can be adapted for use with any images available.
Step3: copy image to fill the 282 x 73 mm rectangle from step 1
Designed using images from XCS software.
Can be adapted for use with any images available.
Step4: Insert rose image from shapes menu
Designed using images from XCS software.
Can be adapted for use with any images available.
Step5: Add an outline of the rose set to 1 and change outline to engrave
Designed using images from XCS software.
Can be adapted for use with any images available.
Step6: Copy outline 5 times and combine in to 1 image, then arrange on lattice image
Designed using images from XCS software.
Can be adapted for use with any images available.
Step7: Select rose outlines and lattice and combine/subtract in to 1 image
Designed using images from XCS software.
Can be adapted for use with any images available.
Step8: Copy rose 5 times and arrange in outlines from step 7; select all and combine
Designed using images from XCS software.
Can be adapted for use with any images available.
Step9: Select image from step 8 and step 7 and combine/unite (may need to set to engrave again)
Designed using images from XCS software.
Can be adapted for use with any images available.
Step10: Engrave at 90 power/250 speed/200 lines
Designed using images from XCS software.
Can be adapted for use with any images available.
