Report
![[Laser cut and engrave] Bicycle Wheel Keychain Set](https://storage-us.atomm.com/resource/xart/result/799402/3c141ff8-aaa5-4391-91bc-a0dc031cd6f5.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
key ring for bicycle key
Instruction
sluitelhanger fiets
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
40WCompatible xTool Machine
M2
10W, 20WF2 Ultra UV
5WF2
15WP3
80WF2 Ultra
40WF1 Ultra
20WM1
5W, 10WD1
5W, 10W, 20WD1 Pro
5W, 10W, 20W, 40WP2
55WF1
10WS1
10W, 20WM1 Ultra
10W, 20WP2S
55WMaterial used
1/8"(3mm) Basswood Plywood
4
316
Instruction
1
Step1
If you like, you can paint the wood first. Cut and engrave one side of the wood.
2
Step2
If you want to engrave the backside, it is rather difficult to get it exactly in the middel. Use the makt processing area, but also use te red pointer of the machine to find exactly the middle. You can make a little mark on the wood, because the middle will be engraved.
3
Step3
Finish with material for making keychains.Comments
