Elian-Angelo

Report

[Laser cut and engrave] Engraved Metal Mailbox – Powder-Coated Surface — Project made with xTool F2 machine for Laser cut and engrave.

[Laser cut and engrave] Engraved Metal Mailbox – Powder-Coated Surface — Project made with xTool F2 machine for Laser cut and engrave.

[Laser cut and engrave] Engraved Metal Mailbox – Powder-Coated Surface — Project made with xTool F2 machine for Laser cut and engrave.

[Laser cut and engrave] Engraved Metal Mailbox – Powder-Coated Surface — Project made with xTool F2 machine for Laser cut and engrave.

[Laser cut and engrave] Engraved Metal Mailbox – Powder-Coated Surface

[Laser cut and engrave] Engraved Metal Mailbox – Powder-Coated Surface

[Laser cut and engrave] Engraved Metal Mailbox – Powder-Coated Surface

[Laser cut and engrave] Engraved Metal Mailbox – Powder-Coated Surface

Engraved Metal Mailbox – Powder-Coated Surface

Instruction

Briefkasten Venezia.xcs

Briefkasten Venezia

.xcs

Application scenario

Laser processing

Machine & module

xTool F2

5W, 15W

Compatibles · 12

Material used

1/8"(3mm) Maple Plywood

gift

7

281

Information

      This project customizes a powder-coated metal tool box with a precise laser engraving. By engraving through the coating, the underlying metal becomes visible, creating a strong contrast and a clean, durable design. Perfect for labeling, personalization, or adding logos, this method transforms a simple tool box into a unique and professional-looking item.

Facebook: https://www.facebook.com/permalink.php?story_fbid=pfbid02UYB1qXoLLkYW3MkUUyLtXWoruG5XUwdwWLm8f7Mbg5nhgtWHXC3cJFs9aQDTBXhxl&id=61582447261965

lasereverythingcontest

Instruction

1

Step1: Remove the Mailbox Lid (if needed)

Engraved Metal Mailbox – Powder-Coated Surface instruction: step 1 - Remove the Mailbox Lid (if needed)

Preview

Unscrew or remove the part you want to engrave so it can be positioned flat and worked on more easily.

2

Step2: Remove the Base Plate

Engraved Metal Mailbox – Powder-Coated Surface instruction: step 2 - Remove the Base Plate

Preview

Take the base plate out of the F2 laser to allow engraving directly on the lower working surface.

3

Step3: Position the Tool Box

Engraved Metal Mailbox – Powder-Coated Surface instruction: step 3 - Position the Tool Box

Preview

Place the metal tool box onto the laser bed and align it properly.

4

Step4: Adjust the Focus

Engraved Metal Mailbox – Powder-Coated Surface instruction: step 4 - Adjust the Focus

Preview

Set the correct focus distance on the surface of the powder coating.

5

Step5: Engrave the Surface

Engraved Metal Mailbox – Powder-Coated Surface instruction: step 5 - Engrave the Surface

Preview

Start the engraving process to remove the coating and reveal the metal beneath.

Comments

Remixes

xTool Supplies Used in This Project

xTool F2

1/8"(3mm) Maple Plywood

1/8"(3mm) Maple Plywood

License