Report

Happy Easter Light-Up Egg Tabletop Sign with Bunny Silhouette

Instruction

EasterLamp

.xcs

Application scenario

Laser processing

Machine & module

xTool P2

55W

Compatible xTool Machine

New

10W, 20W

F2 Ultra UV

15W

80W

F2 Ultra

40W

F1 Ultra

20W

5W, 10W

5W, 10W, 20W

D1 Pro

5W, 10W, 20W, 40W

10W

10W, 20W, 40W

M1 Ultra

10W, 20W

P2S

55W

Material used

1/8"(3mm) Basswood Plywood

884

Information

      Playing with more lighting with my projects, so I made a lamp.  Practicing with flex panels and few times now, I've really gotten the hang of it.  This was made with 3mm thick wood.

Instruction

Step1: Cut per your machine settings for the material you use and stain it

Preview

Stains: I used pickling white for the back panel, weathered oak for the bunny, walnut for the side panels and bottom, sedona red and orange for the eggs and bourbon for the faceplate. Begin assembly.

Step2: Assembly

Preview

Place side panels to bottom with a dab of glue. Add candle now or later. The top takes some patience and coordination. I found it very helpful to use a small tool to nudge the tabs as I pushed down. One can even hook the side panel to pull left or right.

Step3: Faceplate and Egg Pattern

Preview

Glue the faceplate on. The egg does have open panels. The bottom one is optional. If you want it glued in, I suggest added a scrap of wood underneath.