![[Laser cut and engrave] PU Leather Book Cover Engraving - Fairy Tale Motif](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/964610d1-d3ed-4d2c-95f3-8945daeb6cc9.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] PU Leather Book Cover Engraving - Fairy Tale Motif](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] PU Leather Book Cover Engraving - Fairy Tale Motif](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/964610d1-d3ed-4d2c-95f3-8945daeb6cc9.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] PU Leather Book Cover Engraving - Fairy Tale Motif](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/9cfd49cd-d694-4e3c-8242-4624fab05843.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] PU Leather Book Cover Engraving - Fairy Tale Motif](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/85644cdf-aff4-4633-bc88-becbe71008c6.jpeg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
PU Leather Book Cover Engraving - Fairy Tale Motif
Instruction
Information
This guide explains how to engrave a PU leather book cover using a laser cutter. By removing the outer dust jacket of a fairy tale book, you expose a smooth faux leather surface that is ideal for precise and clean engraving results.
Link: https://www.facebook.com/share/19XgBhobuo/?mibextid=wwXIfr
Instruction
Step1: Before you start
Before you begin, keep these key points in mind:
This project uses a fairy tale book with a removable outer dust jacket.
The dust jacket is taken off, revealing a plain PU leather (faux leather) cover underneath.
This PU leather surface works well with standard engraving settings (depending on your machine).
The book must not be too thick, or it will not fit into the laser cutter.
The honeycomb/working plate must be removed to create enough height.
If the book is still too tall afterward, engraving will not work properly.
If you use a different material, you will need to adjust the laser settings accordingly.
It’s recommended to test your settings on the back cover with a small engraving.
Step2: Prepare your design file
Open your design in the laser software.
Adjust:
size
placement
and layout
Make sure everything fits the front of your PU leather book cover.
Step3: Prepare the laser cutter
Remove the honeycomb/working plate from the machine.
This step is necessary to make space for the book height.
Step4: Position the book
Take your fairy tale book and remove the outer dust jacket.
Place the book with the PU leather cover facing up inside the laser cutter.
👉 Put a sheet of paper underneath to protect the surface from residue.
I took a test engraving on the back.
Step5: Define the engraving area (frame function)
Use the frame function in your laser software:
The machine will outline a rectangle
This shows the exact engraving area
👉 Align your book carefully within this frame.
Step6: Focus
Measure.
The red cross should be directly on the book cover.
Step7: Start engraving
Begin the engraving process.
The design will now be burned into the PU leather surface.
Step8: Clean the surface
Remove the book carefully.
Use a dry cloth to wipe away any residue or smoke marks.
Step9: Result
You now have a custom engraved PU leather fairy tale book cover with a clean, elegant finish.
It’s a simple but high-quality DIY project—perfect as a personal gift or decorative piece.
