Report

[Laser cut and engrave] Mountain Clock — Project made with S1 machine for Laser cut and engrave.

Mountain Clock

Remix

Instruction

Files

Original files

AuthorS1 · 1/8"(3mm) Basswood Plywood, 1/8"(3mm) Red Oak Plywood, 3mm Walnut Plywood, 3mm Black Acrylic (for Slide Extension)

Add Make Profile

Same design, different machine, material, or any improvement · Earn 100 Credits

1085

10451

Information

      This project is the hanging clock hanging on the wall pattern on the wall. The mountain patterns are stacked, which will make people have a sense of heart and refreshed. It can be hung in a variety of places such as bedrooms, study rooms, living rooms, living rooms, porch, etc., which is convenient for convenience Watch time at any time, and at the same time, it is a very beautiful decoration.

This remix is based on

[OUT OF STOCK] xTool DIY Clock Kit

xTool DIY Kit

Instruction

Step1

Take out the black walnut plywood, the red oak plywood, the Sali plywood, and the black acrylic, put all the wooden panels with beautiful paper gum, open the machine and connect the computer to introduce the processing files to the XTool Creative Space

Step2

Preview

Cut out the designed model and tear off the beautiful patterned paper glue pasted on the surface.

Step3

Preview

Paste the mountain pattern of the dial onto the black walnut plywood base in the order shown in the picture.

Step4

Preview

Glue the scales onto the dial.

Step5

Preview

Install the movement.

Step6

Preview

Install the pointer.

Step7

Preview

After adjusting the time, install the battery.

Step8

Preview

Assembly Complete.

Note:

1、 Wood can be used for cutting work by pasting it on the surface of the masking tape. This method can effectively reduce the amount of carbonized dust that is attached to the board during laser cutting. After the board is cut, the masking tape can be gently torn off.

2、You can choose to apply a thin coat of wood wax oil on top of the cleaned black walnut boards to give the boards a more premium and textured color.

3、Using sandpaper can help smooth the joints of wooden boards, making the installation process much more successful.

Comments