Report
![[Laser cut and engrave] Merica Sunglasses Hanger](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/7f86a11b-a820-4fcd-96dc-206a155c12ef?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Merica Sunglasses Hanger](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Merica Sunglasses Hanger](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/7f86a11b-a820-4fcd-96dc-206a155c12ef?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Merica Sunglasses Hanger](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/402c2d9e-2db1-4931-a12d-0ed52c4f45c5/C226024D-CD43-4B4C-B1D8-4C0A43972C75_1_201_a.heic?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Merica Sunglasses Hanger
Instruction
MericaHanger
.xcs
Application scenario
Laser (90min)
Machine & module
xTool M1
10WMaterial used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
47
1305
Information
I wanted to show my american pride with the coolest door in the neighborhood so I made this sunglasses merica door hanger.
Instruction
1
Step1: Sunglasses
Preview
- This was designed in a different program. Imported my design
- Insert two small holes on the side for hanging.
- I use .30" x .30" diameter
2
Step2: Text
Preview
- Add the text for your design.
- Stretch it out and make sure its large enough to cover your design.
NOTE: In this photo my text is straight but once cut I arch it on my finished project.
3
Step3: Laser
Preview
Auto measure your material for cutting.
4
Step4: Paint, Glue, String
Preview
Preview
Preview
Paint your project and glue it all together.
5
Step5: String it Up
Preview
Preview
Preview
Grab some string and insert them through the small holes and hang it up on your door!
Comments
