Stainless steel color Test Grid

if you like visit and follow for more: https://www.instagram.com/beamcrafting/

When you open the file, you'll find two test grids.

The test grids are set up so that only the power changes. The speed and line length remain constant. This allows for good reproduction of the results.

However, the material is important. I used 304 stainless steel here. But even if you use 304 stainless steel, the colors may vary. This is due to the metal's composition.

The most important settings are the engraving angle, set to 0° here, and the crosshatch function being activated. This ensures that each circle is first engraved at a 0° angle and then at a 90° angle.

To obtain additional colors, you can adjust the power settings slightly.