Welcome Pride Door Hanger

• First start off by creating a 11.5" x 11.5" diameter
• Next add 4 Triangles making sure they are get larger 
• Now select all objects and copy and past this 4 times
  • now with each on your will select on triangle and the circle and unite at overlap
  • Do this for each triangle
• Now insert at 11.5"x 11.5" circle again and align it with the triangles. (photo #4)
  • Make sure your circle is set to "cut"
  • The triangles should be set to “score”
  • Select all objects and vertical “align center”
  • With everything selected right click “group”
• Now insert 6 small hearts and align them “vertical center”
  • Place them on the center of the hanger these will be set to “score”
  • Select the hearts right click “copy” and “paste” somewhere else on the board and change that to “cut”
• Now add text “welcome” place on the hanger
  • Select the text right click “copy” and “paste” somewhere else on the board and change that to “cut”
• Create another 11.5" x 11.5" diameter and set to “cut”

• Recheck all your settings and auto measure your wood

• I painted my hearts with paint pens 
• Spray painted the rest of the pieces 

• Start by placing the bigger pieces into place making sure that all fit well and that they are in the proper place.
• Next once everything is together you can start gluing your pieces
• Once that has dried you can glue you hearts into place and your welcome text

While I was assembling my project I noticed it was heart to lay the hearts straight so I went back to XCS and created the score lines on top this is help so much in lining everything up in the end.

Also, I forgot to create holes for the string attachement, so I also went back and created small holes for that as well.