Personalized Laser Cut Wooden Easter Basket Tags with Bunny Design

I used 3mm birch plywood sheets for this design. There are 2 separate text settings for the name and the ‘Easter Basket’; feel free to change the style if you want.

You can resize the design, but please make sure that the hole is not too thin at the top. The original design is 8cm tall.

My settings are working fine with my 10W M1 machine; I am using riser base and air assist.

I am sending the eggs a bit to get rig of the chalky parts. Use a fine-grip sandpaper, or baby wipes.

I did not varnish these pieces, as I wanted to keep the natural look. To maximize it, I used a simple jute thread to attach to the top. That's it. Ready to use :)